@article {57807, title = {U.S. energy savings potential from dynamic daylighting control glazings}, journal = {Energy and Buildings}, volume = {66}, year = {2013}, month = {11/2013}, pages = {415-423}, chapter = {415}, abstract = {

Daylighting controls have the potential to reduce the substantial amount of electricity consumed for lighting in commercial buildings. Material science research is now pursuing the development of a dynamic prismatic optical element (dPOE) window coating that can continuously readjust incoming light to maximize the performance and energy savings available from daylighting controls. This study estimates the technical potential for energy savings available from vertical daylighting strategies and explores additional savings that may be available if current dPOE research culminates in a successful market-ready product. Radiance daylight simulations are conducted with a multi-shape prismatic window coating. Simulated lighting energy savings are then applied to perimeter floorspace estimates generated from U.S. commercial building stock data. Results indicate that fully functional dPOE coatings, when paired with conventional vertical daylight strategies, have the potential to reduce energy use associated with U.S. commercial electric lighting demand by as much as 930 TBtu. This reduction in electric lighting demand represents an approximately 85\% increase in the energy savings estimated from implementing conventional vertical daylight strategies alone. Results presented in this study provide insight into energy and cost performance targets for dPOE coatings, which can help accelerate the development process and establish a successful new daylighting technology.

}, keywords = {Clerestories, daylighting, Dynamic prismatic optical elements (dPOE), energy efficiency, Glare, indoor environmental quality, radiance, windows}, doi = {10.1016/j.enbuild.2013.07.013}, author = {Arman Shehabi and Nicholas DeForest and Andrew McNeil and Eric R. Masanet and Jeffery B. Greenblatt and Eleanor S. Lee and Georgeta Masson and Brett A. Helms and Delia J. Milliron} } @article {11811, title = {Energy and visual comfort performance of electrochromic windows with overhangs}, journal = {Building and Environment}, volume = {42}, year = {2007}, month = {06/2007}, pages = {2439-2449}, chapter = {2439}, abstract = {

DOE-2 building energy simulations were conducted to determine if there were practical architectural and control strategy solutions that would enable electrochromic (EC) windows to significantly improve visual comfort without eroding energy-efficiency benefits. EC windows were combined with overhangs since opaque overhangs provide protection from direct sun which EC windows are unable to do alone. The window wall was divided into an upper and lower aperture so that various combinations of overhang position and control strategies could be considered. The overhang was positioned either at the top of the upper window aperture or between the upper and lower apertures. Overhang depth was varied. EC control strategies were fully bleached at all times, modulated based on incident vertical solar radiation limits, or modulated to meet the design work plane illuminance with daylight. The EC performance was compared to a state-of-the-art spectrally selective low-e window with the same divided window wall, window size, and overhang as the EC configuration. The reference window was also combined with an interior shade which was manually deployed to control glare and direct sun. Both systems had the same daylighting control system to dim the electric lighting. Results were given for south-facing private offices in a typical commercial building.

In hot and cold climates such as Houston and Chicago, EC windows with overhangs can significantly reduce the average annual daylight glare index (DGI) and deliver significant annual energy use savings if the window area is large. Total primary annual energy use was increased by 2-5\% for moderate-area windows in either climate but decreased by 10\% in Chicago and 5\% in Houston for large-area windows. Peak electric demand can be reduced by 7-8\% for moderate-area windows and by 14-16\% for large-area windows in either climate. Energy and peak demand reductions can be significantly greater if the reference case does not have exterior shading or state-of-the-art glass.

}, keywords = {building simulation, Control algorithms, daylighting, Electrochromic windows, energy efficiency}, doi = {10.1016/j.buildenv.2006.04.016}, author = {Eleanor S. Lee and Aslihan Tavil} } @techreport {1077, title = {Advancement of Electrochromic Windows}, year = {2006}, month = {04/2006}, abstract = {

This guide provides consumer-oriented information about switchable electrochromic (EC) windows. Electrochromic windows change tint with a small applied voltage, providing building owners and occupants with the option to have clear or tinted windows at any time, irrespective of whether it{\textquoteright}s sunny or cloudy. EC windows can be manually or automatically controlled based on daylight, solar heat gain, glare, view, energy-efficiency, peak electricity demand response, or other criteria. Window controls can be integrated with other building systems, such as lighting and heating/cooling mechanical systems, to optimize interior environmental conditions, occupant comfort, and energy-efficiency.

}, keywords = {commercial buildings, daylight, daylighting controls, Electrochromic windows, energy efficiency, human factors, peak demand, switchable windows, visual comfort}, author = {Eleanor S. Lee and Stephen E. Selkowitz and Robert D. Clear and Dennis L. DiBartolomeo and Joseph H. Klems and Luis L. Fernandes and Gregory J. Ward and Vorapat Inkarojrit and Mehry Yazdanian} }