@techreport {60771, title = {High Performance Building Fa{\c c}ade Solutions-Phase II}, year = {2014}, month = {03/2014}, abstract = {

The High Performance Building Fa{\c c}ade Solutions{\textendash}Phase II project was initiated through the California Energy Commission{\textquoteright}s Public Interest Energy Research (PIER) program in July 2010 to support industry{\textquoteright}s development and deployment of both incremental and breakthrough fa{\c c}ade technologies in partnership with the U.S. Department of Energy (DOE). The objective of this three-year project was to develop, or support the development and deployment of, promising near-term and emerging zero net energy building fa{\c c}ade technologies for solar control and daylighting, addressing two of the largest end uses in California commercial buildings: cooling and lighting. In partnership with industry (such as manufacturers), three classes of technologies were investigated: daylighting systems, angular-selective shading systems, and dynamic fa{\c c}ade systems. Commercially available and emerging prototype technologies were developed and evaluated using laboratory tests. Simulations, full-scale outdoor tests in the Advanced Window Testbed, and demonstration projects quantified energy and peak electric demand reductions and occupant satisfaction, acceptance, and comfort associated with the resultant indoor environment. Several new technologies were developed using virtual prototyping tools. Integrated control systems were developed using model predictive controls. Simulation tools were developed to model operable complex fenestration systems such as shades and microprismatic films. A schematic design tool called COMFEN was developed to facilitate evaluation of these advanced technologies in the early design phase. All three classes of technologies resulted in significant reductions in perimeter zone energy use and peak electric demand, providing viable options that can support California{\textquoteright}s long-term goal of achieving zero net energy use in the next decade.

}, keywords = {automated shading, between-pane shading, bidirectional scattering distribution functions, building energy simulation tools, Complex fenestration systems, daylighting, daylighting simulation tools, electrochromics, exterior shading, goniophotometer, light shelves, microprismatic films, model predictive controls, motorized shading, shading, solar-optical properties, switchable windows, thermochromics, virtual prototyping, window heat transfer}, author = {Eleanor S. Lee and Brian E. Coffey and Luis L. Fernandes and Sabine Hoffmann and Andrew McNeil and Anothai Thanachareonkit and Gregory J. Ward} } @techreport {60935, title = {A Pilot Demonstration of Electrochromic and Thermochromic Windows in the Denver Federal Center, Building 41, Denver, Colorado}, year = {2013}, note = {

Completed September 30, 2012, released March 30, 2014.

}, month = {07/2013}, abstract = {

Chromogenic glazing materials are emerging technologies that tint reversibly from a clear to dark tinted state either passively in response to environmental conditions or actively in response to a command from a switch or building automation system. Switchable coatings on glass manage solar radiation and visible light while enabling unobstructed views to the outdoors. Building energy simulations estimate that actively controlled, near-term chromogenic glazings can reduce perimeter zone heating, ventilation, and air- conditioning (HVAC) and lighting energy use by 10-20\% and reduce peak electricity demand by 20-30\%, achieving energy use levels that are lower than an opaque, insulated wall.

This project demonstrates the use of two types of chromogenic windows: thermochromic and electrochromic windows. By 2013, these windows will begin production in the U.S. by multiple vendors at high-volume manufacturing plants, enabling lower cost and larger area window products to be specified. Both technologies are in the late R\&D stage of development, where cost reductions and performance improvements are underway. Electrochromic windows have been installed in numerous buildings over the past four years, but monitored energy-efficiency performance has been independently evaluated in very limited applications. Thermochromic windows have been installed in one other building with an independent evaluation, but results have not yet been made public.

}, keywords = {building controls, daylighting, Demand Side Management, electrochromic, energy-efficiency, Smart windows, switchable windows, Thermochromic, Window}, url = {http://gsa.gov/portal/content/187967}, author = {Eleanor S. Lee and Luis L. Fernandes and Howdy Goudey and Jacob C. Jonsson and Dragan C. Curcija and Xiufeng Pang and Dennis L. DiBartolomeo and Sabine Hoffmann} } @techreport {1077, title = {Advancement of Electrochromic Windows}, year = {2006}, month = {04/2006}, abstract = {

This guide provides consumer-oriented information about switchable electrochromic (EC) windows. Electrochromic windows change tint with a small applied voltage, providing building owners and occupants with the option to have clear or tinted windows at any time, irrespective of whether it{\textquoteright}s sunny or cloudy. EC windows can be manually or automatically controlled based on daylight, solar heat gain, glare, view, energy-efficiency, peak electricity demand response, or other criteria. Window controls can be integrated with other building systems, such as lighting and heating/cooling mechanical systems, to optimize interior environmental conditions, occupant comfort, and energy-efficiency.

}, keywords = {commercial buildings, daylight, daylighting controls, Electrochromic windows, energy efficiency, human factors, peak demand, switchable windows, visual comfort}, author = {Eleanor S. Lee and Stephen E. Selkowitz and Robert D. Clear and Dennis L. DiBartolomeo and Joseph H. Klems and Luis L. Fernandes and Gregory J. Ward and Vorapat Inkarojrit and Mehry Yazdanian} }