@article {60938, title = {Balancing daylight, glare, and energy-efficiency goals: An evaluation of exterior coplanar shading systems using complex fenestration modeling tools}, journal = {Energy and Buildings}, volume = {112}, year = {2016}, month = {01/2016}, pages = {279-298}, abstract = {

Exterior shades are the most effective way to control solar load in buildings. Twelve different coplanar shades with different geometry, material properties and cut-off angles were investigated for two California climates: the moderate San Francisco Bay Area climate and a hot and dry Southern California climate. The presented results distinguish themselves from other simulation studies by a newly developed method that combines three research-grade software programs (Radiance, EnergyPlus and Window 7) to calculate heat transfer, daylight, and glare resulting from optically-complex fenestration systems more accurately. Simulations were run for a case with constant electric lighting and a case with daylighting controls for a prototypical, internal load dominated office building.

In the case of daylighting controls, the choice of slat angle and solar cut-off angle of a fixed exterior slat shading system is non trivial. An optimum slat angle was identified for the considered cases. Material properties (e.g., solar and visible reflectance) did not affect energy use if constant electric lighting was assumed, but they did have a significant influence on energy use intensity (EUI) when daylighting controls were assumed. Energy use increased substantially when an additional interior shade was used for glare control.

}, keywords = {Complex fenestration systems, Discomfort Glare, Energy Plus, Energy Use Intensity, Exterior shades, Glare Control, radiance}, doi = {10.1016/j.enbuild.2015.12.009}, author = {Sabine Hoffmann and Eleanor S. Lee and Andrew McNeil and Luis L. Fernandes and Dragan Vidanovic and Anothai Thanachareonkit} } @proceedings {60933, title = {Discomfort glare with complex fenestration systems and the impact on energy use when using daylighting control}, journal = {10th International Conference on Advanced Building Skins}, year = {2015}, month = {11/2015}, address = {Bern, Switzerland}, keywords = {building simulation, Complex fenestration systems, daylighting control, Discomfort Glare, Energy Use Intensity, radiance}, author = {Sabine Hoffmann and Andrew McNeil and Eleanor S. Lee and Raghuram Kalyanam} } @techreport {60771, title = {High Performance Building Fa{\c c}ade Solutions-Phase II}, year = {2014}, month = {03/2014}, abstract = {

The High Performance Building Fa{\c c}ade Solutions{\textendash}Phase II project was initiated through the California Energy Commission{\textquoteright}s Public Interest Energy Research (PIER) program in July 2010 to support industry{\textquoteright}s development and deployment of both incremental and breakthrough fa{\c c}ade technologies in partnership with the U.S. Department of Energy (DOE). The objective of this three-year project was to develop, or support the development and deployment of, promising near-term and emerging zero net energy building fa{\c c}ade technologies for solar control and daylighting, addressing two of the largest end uses in California commercial buildings: cooling and lighting. In partnership with industry (such as manufacturers), three classes of technologies were investigated: daylighting systems, angular-selective shading systems, and dynamic fa{\c c}ade systems. Commercially available and emerging prototype technologies were developed and evaluated using laboratory tests. Simulations, full-scale outdoor tests in the Advanced Window Testbed, and demonstration projects quantified energy and peak electric demand reductions and occupant satisfaction, acceptance, and comfort associated with the resultant indoor environment. Several new technologies were developed using virtual prototyping tools. Integrated control systems were developed using model predictive controls. Simulation tools were developed to model operable complex fenestration systems such as shades and microprismatic films. A schematic design tool called COMFEN was developed to facilitate evaluation of these advanced technologies in the early design phase. All three classes of technologies resulted in significant reductions in perimeter zone energy use and peak electric demand, providing viable options that can support California{\textquoteright}s long-term goal of achieving zero net energy use in the next decade.

}, keywords = {automated shading, between-pane shading, bidirectional scattering distribution functions, building energy simulation tools, Complex fenestration systems, daylighting, daylighting simulation tools, electrochromics, exterior shading, goniophotometer, light shelves, microprismatic films, model predictive controls, motorized shading, shading, solar-optical properties, switchable windows, thermochromics, virtual prototyping, window heat transfer}, author = {Eleanor S. Lee and Brian E. Coffey and Luis L. Fernandes and Sabine Hoffmann and Andrew McNeil and Anothai Thanachareonkit and Gregory J. Ward} }