@conference {11703, title = {Demonstration of a Light-Redirecting Skylight System at the Palm Springs Chamber of Commerce}, booktitle = {1996 ACEEE Summer Study on Energy Efficiency in Buildings: Profiting from Energy Efficiency}, year = {1996}, month = {08/1996}, address = {Pacific Grove, CA}, abstract = {

As part of a demonstration project to provide a comprehensive energy upgrade to a 294 m2 (3168 ft2) commercial building, an advanced skylight design was developed using optical light control materials and geometry to provide daylight to two adjoining offices. The skylight system was developed using outdoor physical model tests and simulation tools Limited on-site measurements and occupant polls were conducted. Market issues were addressed. The skylight systems were found to improve lighting quality and to control excessive daylight illuminance levels compared to a conventional diffusing bubble skylight. Daylighting principles developed in earlier work for vertical glazing systems (light shelves and light pipes) were shown to be applicable in skylight designs at full-scale.

}, author = {Eleanor S. Lee and Liliana O. Beltran and Stephen E. Selkowitz} } @conference {11710, title = {The Design and Evaluation of Three Advanced Daylighting Systems: Light Shelves, Light Pipes and Skylights}, booktitle = {Solar 94, Golden Opportunities for Solar Prosperity}, year = {1994}, month = {06/1994}, address = {San Jose, CA}, abstract = {

We present results from the design and evaluation of three advanced daylighting systems: a light shelf, a light pipe, and a skylight. These systems use optical films and an optimizedsgeometry to passively intercept and redirect sunlight further into the building. The objectives of these designs are to increase daylighting illuminance levels at distances of 4.6-9.1 m (15-30 ft) from the window, and to improve the uniformity of the daylight distribution and the luminance gradient across the room under variable sun and sky conditions throughout the year. The designs were developed through a series of computer-assisted ray-tracing studies, photometric measurements, and observations using physical scale models. Comprehensive sets of laboratory measurements in combination with analytical routines were then used to simulate daylight performance for any solar position. Results show increased daylight levels and an improved luminance gradient throughout the year - indicating that lighting energy consumption and cooling energy due to lighting can be substantially reduced with improvements to visual comfort. Future development of the designs may further improve the daylighting performance of these systems.

}, author = {Liliana O. Beltran and Eleanor S. Lee and Konstantinos M. Papamichael and Stephen E. Selkowitz} }