01914nas a2200253 4500008004100000245013900041210006900180260002500249490000800274520105500282653001901337653000801356653003601364653001601400653000801416100002201424700002001446700002901466700003101495700001901526700002301545700001901568856007301587 2008 eng d00aFunctionalization of Hydrogen-free Diamond-like Carbon Films using Open-air Dielectric Barrier Discharge Atmospheric Plasma Treatments0 aFunctionalization of Hydrogenfree Diamondlike Carbon Films using aBoulder, COc08/20080 v2543 a

A dielectric barrier discharge (DBD) technique has been employed to produce uniform atmospheric plasmas of He and N2 gas mixtures in open air in order to functionalize the surface of filtered-arc deposited hydrogen-free diamond-like carbon (DLC) films. XPS measurements were carried out on both untreated and He/N2 DBD plasma-treated DLC surfaces. Chemical states of the C 1s and N 1s peaks were collected and used to characterize the surface bonds. Contact angle measurements were also used to record the short- and long-term variations in wettability of treated and untreated DLC. In addition, cell viability tests were performed to determine the influence of various He/N2 atmospheric plasma treatments on the attachment of osteoblast MC3T3 cells. Current evidence shows the feasibility of atmospheric plasmas in producing long-lasting variations in the surface bonding and surface energy of hydrogen-free DLC and consequently the potential for this technique in the functionalization of DLC-coated devices.

10aCell viability10aDLC10aIon implantation and deposition10awettability10aXPS1 aEndrino, Jose, L.1 aMarco, Jose, F.1 aPoolcharuansin, Phitsanu1 aPhani, Ayalasomayajula, R.1 aAllen, Matthew1 aAlbella, José, M.1 aAnders, André uhttps://facades.lbl.gov/publications/functionalization-hydrogen-free01008nas a2200157 4500008004100000245008100041210006900122260001200191300001000203490000700213520048800220100002200708700002800730700001900758856007300777 2008 eng d00aObservation of Ti4+ ions in a high power impulse magnetron sputtering plasma0 aObservation of Ti4 ions in a high power impulse magnetron sputte c08/2008 a715040 v933 a

Multiply charged titanium ions including Ti4+ were observed in high power impulse magnetron sputtering discharges. Mass/charge spectrometry was used to identify metal ion species. Quadruply charged titanium ions were identified by isotope-induced broadening at mass/charge 12. Due to their high potential energy, Ti4+ ions give a high yield of secondary electrons, which in turn are likely to be responsible for the generation of multiply charged states.

1 aAndersson, Joakim1 aEhiasarian, Arutiun, P.1 aAnders, André uhttps://facades.lbl.gov/publications/observation-ti4-ions-high-power01855nas a2200145 4500008004100000050001500041245005500056210005500111520137800166100001901544700002201563700001801585700002801603856007801631 2007 eng d aLBNL-6214700aPhysics of High Power Impulse Magnetron Sputtering0 aPhysics of High Power Impulse Magnetron Sputtering3 a

High power impulse magnetron sputtering is characterized by discharge pulses whose target power density exceeds conventional sputtering power densities by two orders of magnitude or more; the goal is to provide a large flux of ionized sputtered material. The processes of pulse evolution are briefly reviewed, including secondary electron emission, self-sputtering, and rarefaction. Using a pulse power supply capable of providing constant voltage for target peak power densities up to 5 kW/cm2, the evolution of the current-voltage characteristics was investigated for copper and titanium. It is shown that the characteristic cannot be reduced to value pairs. Rather, a strong but reproducible development exists. The details depend on the argon pressure and applied voltage. Each target material exhibits a distinct and sharp transition to a high current regime that appears to be dominated by metal plasma. Despite the higher sputter yields for copper, the transition to the high current regime occurs much earlier and stronger for titanium, which may be attributed to a higher secondary electron yield and hence a higher density of electrons confined in the magnetron structure. At high currents, the closed-drift Hall current generates a magnetic field that weakens plasma confinement, thereby enabling large ion currents to reach a biased substrate.

1 aAnders, André1 aAndersson, Joakim1 aHorwat, David1 aEhiasarian, Arutiun, P. uhttps://facades.lbl.gov/publications/physics-high-power-impulse-magnetron02196nas a2200145 4500008004100000050001500041245006500056210006300121520171000184100001901894700002201913700002501935700001701960856007301977 2002 eng d aLBNL-5269900aA Characterization of the Nonresidential Fenestration Market0 aCharacterization of the Nonresidential Fenestration Market3 a

The purpose of this report is to characterize the nonresidential fenestration market in order to better understand market barriers to, and opportunities for, energy-efficient fenestration products. In particular, the goal is to:

The U.S. glass industry is a $27 billion enterprise with both large producers and small firms playing pivotal roles in the industry. While most sectors of the glass industry have restructured and consolidated in the past 20 years, the industry still employs 150,000 workers. Nonresidential glazing accounts for approximately 18% of overall U.S. glass production. In 1999, nonresidential glazing was supplied to approximately 2.2 billion ft2 of new construction and additions. That same year, nonresidential glazing was also supplied to approximately 1.1 billion ft2 of remodeling construction. With an industry this large and complex, it is to be expected that many market participants can influence fenestration selection. If market barriers to the selection of high performance fenestration products are better understood, then the U. S. Department of Energy (USDOE), the Northwest Energy Efficiency Alliance (NEEA), and others can develop programs and policies that promote greater energy efficiency in commercial glazing products.

1 aShehabi, Arman1 aEley, Charles, N.1 aArasteh, Dariush, K.1 aDegens, Phil uhttps://facades.lbl.gov/publications/characterization-nonresidential00811nam a2200241 4500008004100000050001500041245007900056210006900135100001600204700002300220700001900243700002500262700002000287700001700307700002000324700003000344700002000374700002100394700002000415700002800435700002700463856007900490 2001 eng d aLBNL-4749300aDaylight in Buildings. A Source Book on Daylighting Systems and Components0 aDaylight in Buildings A Source Book on Daylighting Systems and C1 aRuck, Nancy1 aAschehoug, Øyvind1 aAydinli, Sirri1 aChristoffersen, Jens1 aCourret, Gilles1 aEdmonds, Ian1 aJakobiak, Roman1 aKischkoweit-Lopin, Martin1 aKlinger, Martin1 aLee, Eleanor, S.1 aMichel, Laurent1 aScartezzini, Jean-Louis1 aSelkowitz, Stephen, E. uhttps://facades.lbl.gov/daylight-buildings-source-book-daylighting-systems01691nas a2200169 4500008004100000050001500041245008300056210006900139300001200208490000700220520112600227100002501353700003401378700001401412700002401426856007101450 2001 eng d aLBNL-4901800aA Method for Simulating the Performance of Photosensor-Based Lighting Controls0 aMethod for Simulating the Performance of PhotosensorBased Lighti a883-8890 v343 a

The unreliability of photosensor-based lighting controls continues to be a significant market barrier that prevents widespread acceptance of daylight dimming controls in commercial buildings. Energy savings from the use of daylighting in commercial buildings is best realized through the installation of reliable photoelectric lighting controls that dim electric lights when sufficient daylight is available to provide adequate background and/or task illumination. In prior work, the authors discussed the limitations of current simulation approaches and presented a robust method to simulate the performance of photosensor-based controls using an enhanced version of the radiance lighting simulation package. The method is based on the concept of multiplying two fisheye images: one generated from the angular sensitivity of the photosensor and the other from a 180 or 360 deg. fisheye image of the space as seen by the photosensor. This paper includes a description of the method, its validation and possible applications for designing, placing, calibrating and commissioning photosensor-based lighting controls.

1 aEhrlich, Charles, K.1 aPapamichael, Konstantinos, M.1 aLai, Judy1 aRevzan, Kenneth, L. uhttps://facades.lbl.gov/publications/method-simulating-performance01681nas a2200157 4500008004100000050001500041245006800056210006700124260003600191520112500227100002501352700003401377700001401411700002401425856007401449 2001 eng d aLBNL-4754400aSimulating the Operation of Photosensor-Based Lighting Controls0 aSimulating the Operation of PhotosensorBased Lighting Controls aRio de Janeiro, Brazilc08/20013 a

Energy savings from the use of daylighting in commercial buildings are realized through implementation of photoelectric lighting controls that dim electric lights when sufficient daylight is available to provide adequate workplane illumination. The dimming level of electric lighting is based on the signal of a photosensor. Current simulation approaches for such systems are based on the questionable assumption that the signal of the photosensor is proportional to the task illuminance. This paper presents a method that simulates the performance of photosensor controls considering the acceptance angle, angular sensitivity, placement of the photosensor within a space, and color correction filter. The method is based on the multiplication of two fisheye images: one generated from the angular sensitivity of the photosensor and the other from a 180- or 360-degree fisheye image of the space as seen by the photosensor. The paper includes a detailed description of the method and its implementation, example applications, and validation results based on comparison with measurements in an actual office space.

1 aEhrlich, Charles, K.1 aPapamichael, Konstantinos, M.1 aLai, Judy1 aRevzan, Kenneth, L. uhttps://facades.lbl.gov/publications/simulating-operation-photosensor01591nas a2200121 4500008004100000050001500041245008200056210006900138490000700207520115900214100002501373856007101398 1997 eng d aLBNL-4001600aSimulating the Visual Performance of Electrochromic Glazing for Solar Control0 aSimulating the Visual Performance of Electrochromic Glazing for 0 v273 a

A new technology called electrochromic glazing promises to provide the building industry with a means to dynamically control the visual appearance and solar gain of windows. Electrochromic glazing is a technology which allows an otherwise ordinary looking piece of laminated glass to change tint with the application of a small electrical charge. Prototype electrochromic devices have been produced in sizes up to one square foot, however, manufacturers are several years away from producing glazing samples large enough to fill the aperture of a typical perimeter office. Tooling up for the production of large samples is prohibitively expensive unless some assurance of the marketability of these new electrochromic products can be demonstrated.

Electrochromic glazings defy traditional performance rating mechanisms because of the temporal dimension of their thermal and visual characteristics. Every electrochromic glazing assembly has an infinite number of states at which the thermal and visual appearance could be characterized. Furthermore, the rate at which the assembly changes between states is vital for a complete understanding.

1 aEhrlich, Charles, K. uhttps://facades.lbl.gov/publications/simulating-visual-performance02117nas a2200133 4500008004100000050001500041245007800056210006900134520162400203100003401827700002501861700002201886856007501908 1996 eng d aLBNL-4416700aDesign and Evaluation of Daylighting Applications of Holographic Glazings0 aDesign and Evaluation of Daylighting Applications of Holographic3 a

When combined with appropriate electric lighting dimming controls, the use of daylight for ambient and task illumination can significantly reduce energy requirements in commercial buildings. While skylights can effectively illuminate any part of one-story buildings, conventional side windows can illuminate only a 15 ft - 20 ft (4.6 m - 6.1 m) depth of the building perimeter. Even so, the overall efficacy of daylight is limited, because side windows produce uneven distributions of daylight. Achieving adequate illumination at distances further away from the window results in excessive illumination near the window, which increases cooling loads from the associated solar heat gain. As a result, the use of larger apertures and/or higher transmittance glazings, to introduce daylight deeper than 15 ft - 20 ft (4.6 m - 6.1 m), may prove ineffective with respect to saving energy, because cooling load penalties may exceed the electric lighting savings.

The need for more uniform distribution of daylight admitted through side windows has stimulated significant research and development efforts in new fenestration designs and glazing technologies. Many of these approaches, including holographic glazings, rely on the common strategy of redirecting sunlight and reflecting it off the ceiling towards the back of the room. Prior studies on the daylight and energy performance of holographic glazings have been disappointing, however inconclusive because of poor hologram quality, low diffraction efficiency and inadequate hologram design and building application considerations [Papamichael et al 1994].

1 aPapamichael, Konstantinos, M.1 aEhrlich, Charles, K.1 aWard, Gregory, J. uhttps://facades.lbl.gov/publications/design-and-evaluation-daylighting01437nas a2200157 4500008004100000050001500041245009200056210006900148260003100217520085700248100002001105700002001125700002501145700002101170856008801191 1996 eng d aLBNL-3969200aThe National Energy Requirements of Residential Windows in the U.S.: Today and Tomorrow0 aNational Energy Requirements of Residential Windows in the US To aPacific Grove, CAc08/19963 a

This paper describes an end-use analysis of the national energy requirements of U.S. residential window technologies. We estimate that the current U.S. stock of 19 billion square feet of residential windows is responsible for 1.7 quadrillion BTUs (or quads) per year of energy use - 1.3 quads of heating and 0.4 quads of cooling energy - which represents about 2% of total U.S. energy consumption. We show that national energy use due to windows could be reduced by 25% by the year 2010 through accelerated adoption of currently available, advanced window technologies such as low-e and solar control low-e coatings, vinyl and wood frames, and superwindows. We evaluate the economics of the technologies regionally, considering both climatic and energy price variations, and find that the technologies would be cost effective for most consumers.

1 aFrost, Karl, J.1 aEto, Joseph, H.1 aArasteh, Dariush, K.1 aYazdanian, Mehry uhttp://aceee.org/files/proceedings/1996/data/papers/SS96_Panel10_Paper07.pdf#page=101300nas a2200145 4500008004100000050001500041245011600056210006900172260003800241520071500279100002000994700002501014700002701039856008801066 1996 eng d aLBNL-4225400aTransforming the Market for Residential Windows: Design Considerations for DOE's Efficient Window Collaborative0 aTransforming the Market for Residential Windows Design Considera aPacific Grove, CAbACEEEc08/19963 a

Market adoption of recent, commercially available technological advances that improve the energy performance of windows will lead to immediate economic and energy savings benefits to the nation. This paper is a scoping study intended to inform the design of a major DOE initiative to accelerate market adoption of these windows in the residential sector. We describe the structure of the U.S. residential window market and the interests of the various market players. We then briefly review five recent market transformation initiatives. Finally, we summarize our findings in a list of considerations we believe will be important for the DOE's initiative to transform the U.S. residential window market.

1 aEto, Joseph, H.1 aArasteh, Dariush, K.1 aSelkowitz, Stephen, E. uhttp://aceee.org/files/proceedings/1996/data/papers/SS96_Panel10_Paper05.pdf#page=101641nas a2200133 4500008004100000050001500041245013100056210006900187520111200256100002001368700002501388700002001413856007401433 1993 eng d aLBNL-3395600aSavings from Energy Efficient Windows: Current and Future Savings from New Fenestration Technologies in the Residential Market0 aSavings from Energy Efficient Windows Current and Future Savings3 a

Heating and cooling energy lost through windows in the residential sector (estimated at two-thirds of the energy lost through windows in all sectors) currently accounts for 3 percent (or 2.8 quads) of total US energy use, costing over $26 billion annually in energy bills. Installation of energy-efficient windows is acting to reduce the amount of energy lost per unit window area. Installation of more energy efficient windows since 1970 has resulted in an annual savings of approximately 0.6 quads. If all windows utilized existing cost effective energy conserving technologies, then residential window energy losses would amount to less than 0.8 quads, directly saving $18 billion per year in avoided energy costs. The nationwide installation of windows that are now being developed could actually turn this energy loss into a net energy gain. Considering only natural replacement of windows and new construction, appropriate fenestration policies could help realize this potential by reducing annual residential window energy losses to 2.2 quads by the year 2012, despite a growing housing stock.

1 aFrost, Karl, J.1 aArasteh, Dariush, K.1 aEto, Joseph, H. uhttps://facades.lbl.gov/publications/savings-energy-efficient-windows