02807nas a2200253 4500008004100000022001300041245012200054210006900176260001200245300001100257490000800268520202500276653001602301653001902317653002402336653000802360653001202368100001402380700001802394700002102412700002502433700002802458856006702486 2019 eng d a0360132300aSplit-pane electrochromic window control based on an embedded photometric device with real-time daylighting computing0 aSplitpane electrochromic window control based on an embedded pho c08/2019 a1062290 v1613 a

Well-designed electrochromic (EC) glazing control can improve the energy performance of buildings and visual comfort of occupants in highly glazed buildings. This paper designed and demonstrated a compact integrated EC glazing automation system to control tint states of a split-pane EC window according to variations of sky conditions. The control is based on monitoring the luminance distribution of the sky and real-time lighting computation for a building interior, using an embedded photometric device (EPD). It optimizes tint states of EC glazing to offer sufficient daylight provision and temper discomfort glare for occupants, which potentially mitigates excessive solar heat gain. ’In-situ’ experiments were conducted in a full-scale testbed to demonstrate the daylighting performance under various sky conditions. Experimental results showed 83% of the working time for work-plane illuminance (WPI) and 95% of the time for daylight glare probability (DGP) were constrained in comfort range (WPI[500, 2000] lux, DGP  0.35) by the automated EC glazing (controlled by EPD) under clear skies; 68% of the time for WPI and 94% of the time for DGP in confined range under clear skies with thin clouds; 62% of the time for WPI and 85% of the time for DGP in confined range under partly cloudy skies.

10adaylighting10aelectrochromic10aEmbedded Controller10aHDR10awindows1 aWu, Yujie1 aWang, Taoning1 aLee, Eleanor, S.1 aKämpf, Jérôme, H.1 aScartezzini, Jean-Louis uhttps://linkinghub.elsevier.com/retrieve/pii/S036013231930439103134nas a2200241 4500008004100000022001300041245011500054210006900169260001200238300001400250490000800264520230200272653005802574653001602632653002102648653002102669653004902690653001302739100001802752700001802770700002102788856008302809 2018 eng d a0378778800aEfficient modeling of optically-complex, non-coplanar exterior shading: Validation of matrix algebraic methods0 aEfficient modeling of opticallycomplex noncoplanar exterior shad c09/2018 a464 - 4830 v1743 a

It has long been established that shading windows with overhangs, fins, and other types of non-coplanar systems (NCS) is one of the most effective ways of controlling solar heat gains in buildings because they intercept solar radiation prior to entry into the building. Designers however often specify non-opaque materials (e.g., louvers, fritted glass, expanded metal mesh) for these systems in order to admit daylight, reduce lighting energy use, and improve indoor environmental quality. Most simulation tools rely on geometric calculations and radiosity methods to model the solar heat gain impacts of NCS and cannot model optically-complex materials or geometries. For daylighting analysis, optically-complex NCS can be modeled using matrix algebraic methods, although time-efficient parametric analysis has not yet been implemented. Determining the best design and/or material for static or operable NCS that minimize cooling, heating, and lighting energy use and peak demand requires an iterative process. This study describes and validates a matrix algebraic method that enables parametric energy analysis of NCS. Such capabilities would be useful not only for design but also for development of prescriptive energy-efficiency standards, rating and labeling systems for commercial products, development of design guidelines, and development of more optimal NCS technologies.

A facade or "F" matrix, which maps the transfer of flux from the NCS to the surface of the window, is introduced and its use is explained. A field study was conducted in a full-scale outdoor testbed to measure the daylight performance of an operable drop-arm awning. Simulated data were compared to measured data in order to validate the models. Results demonstrated model accuracy: simulated workplane illuminance was within 11-13%, surface luminance was within 16-18%, and the daylight glare probability was within 6-9% of measured results. Methods used to achieve accurate results are discussed. Results of the validation of daylighting performance are applicable to solar heat gain performance. Since exterior shading can also significantly reduce peak demand, these models enable stakeholders to more accurately assess HVAC and lighting impacts in support of grid management and resiliency goals.

10abidirectional scattering distribution function (BSDF)10adaylighting10aexterior shading10asolar heat gains10avalidation; building energy simulation tools10awindows.1 aWang, Taoning1 aWard, Gregory1 aLee, Eleanor, S. uhttps://www.sciencedirect.com/science/article/pii/S0378778818302457?via%3Dihub