02791nas a2200289 4500008003900000022001300039245010400052210006900156260001200225300001400237490000700251520187700258653002002135653002802155653001802183653002402201653002002225100002302245700001902268700002202287700002802309700002202337700002102359700002702380700002402407856007002431 2013 d a0360132300aRegional performance targets for transparent near-infrared switching electrochromic window glazings0 aRegional performance targets for transparent nearinfrared switch c03/2013 a160 - 1680 v613 a

With building heating and cooling accounting for nearly 14% of the national energy consumption, emerging technologies that improve building envelope performance have significant potential to reduce building energy consumption. Actual savings from these technologies will depend heavily upon their performance in diverse climate and operational conditions. In many cases, early-stage research can benefit from detailed investigation in order to develop performance thresholds and identify target markets. One example, a dynamic, highly transparent, near-infrared switching electrochromic (NEC) window glazing, is the focus of this investigation. Like conventional electrochromics, the NEC glazing can dynamically tune its optical properties with a small applied voltage. Consequently, the glazing can block or transmit solar heat to reduce cooling or heating loads, respectively. Unlike conventional electrochromics, NEC glazings remain transparent to visible light, causing no adverse effect to daylighting or building aesthetics. This study utilizes the software COMFEN to simulate a broad range of NEC performance levels, for commercial and residential buildings in 16 climate-representative reference cities. These simulations are the basis for identifying performance levels necessary to compete with existing static technologies. These results indicate that energy savings are strongly influenced by blocking-state performance. Additionally, residential applications have lower performance requirements due to their characteristic internal heat gains. Finally, the most dynamic NEC performance level is simulated in competition with high performing static alternatives. Here heating and cooling energy savings range from 5 to 11 kWh/m2 yr for commercial and 8–15 kWh/m2 yr for residential, in many regions on the order of 10%.

10aDynamic windows10aElectrochromic glazings10aNIR-switching10aPerformance targets10aSolar heat gain1 aDeForest, Nicholas1 aShehabi, Arman1 aGarcia, Guillermo1 aGreenblatt, Jeffery, B.1 aMasanet, Eric, R.1 aLee, Eleanor, S.1 aSelkowitz, Stephen, E.1 aMilliron, Delia, J. uhttps://facades.lbl.gov/publications/regional-performance-targets02197nas a2200229 4500008003900000245013800039210006900177260001200246300001200258490000700270520138900277653005201666653003301718653001601751653002001767100001901787700002301806700002101829700002201850700002101872856007401893 2013 d00aA validation of a ray-tracing tool used to generate bi-directional scattering distribution functions for complex fenestration systems0 avalidation of a raytracing tool used to generate bidirectional s c12/2013 a404-4140 v983 a

Fenestration attachments are anticipated to produce significant reductions in building energy use because they can be deployed quickly at low-cost. New software tools enable users to assess the building energy impacts of optically complex fenestration systems (CFS) such as shades, Venetian blinds, or daylighting systems. However, such tools require users to provide bi-directional scattering distribution function (BSDF) data that describe the solar-optical performance of the CFS. A free, open-source Radiance tool genBSDF enables users to generate BSDF data for arbitrary CFS. Prior to genBSDF, BSDF data for arbitrary fenestration systems could only be produced using either expensive software or with expensive equipment. genBSDF outputs CFS data in the Window 6 XML file format and so can be used with CFS-enabled software tools to model multi-layered window systems composed of glazing and shading layers.

We explain the basis and use of the genBSDF tool and validate the tool by comparing results for four different cases to BSDF data produced via alternate methods. This validation demonstrates that BSDFs created with genBSDF are comparable to BSDFs generated analytically using TracePro and by measurement with a scanning goniophotometer. This tool is expected to support accelerated adoption of fenestration attachments and daylighting technologies.

10aBi-directional scattering distribution function10aComplex fenestration systems10adaylighting10aSolar heat gain1 aMcNeil, Andrew1 aJonsson, Jacob, C.1 aAppelfeld, David1 aWard, Gregory, J.1 aLee, Eleanor, S. uhttps://facades.lbl.gov/publications/validation-ray-tracing-tool-used