04341nas a2200157 4500008003900000245008100039210006900120260001200189520378700201100002703988700002604015700002004041700002304061700002204084856007704106 2014 d00aCOMFEN – Early Design Tool for Commercial Facades and Fenestration Systems0 aCOMFEN Early Design Tool for Commercial Facades and Fenestration c03/20143 a
California leads the nation in building energy efficiency standards and is a leader in the United States for legislation to reduce greenhouse gas emissions. Achieving these goals in practice requires that design teams and owners have access to technologies, systems and decision support tools that support their design work. This California Energy Commission funded work on the COMFEN software tool, which gives building practitioners, such as architects and engineers, the ability to assess the energy consequences of building design decisions, is thus a key enabling element that supports the AEC community in achieving ever more stringent performance requirements. COMFEN can provide needed building design guidance to not achieve the shorter term code goals but supports more aggressive achievement of the net-zero energy performance and peak load reduction required for all new buildings by 2030 as well as supporting deep retrofit of existing building stock.
Achieving a net-zero energy building cannot be done solely by improving the efficiency of the engineering systems (HVAC, lighting, equipment). It also requires consideration of the essential nature of the building starting early in the design process, including factors such as architectural form, massing, orientation and enclosure. Making informed decisions about the fundamental character of a building requires continuous assessment of the effects of the complex interaction of these factors on the resulting performance of the building as the design evolves. The complexity of these interactions necessitates the use of modeling and simulation tools to dynamically analyze the effects of the relationships. Decisions about the building fundamentals are often made in the earliest stages of design, before a complete 'building' exists to model so that a focus on representative spaces in the building allows earlier guidance for the decision making.
COMFEN, an early-design energy modeling tool developed by LBNL, is designed specifically to make informed decisions about building fundamentals by considering the design of the building envelope, orientation and massing on building performance. It supports exploratory work early in the process by architects but is also useful for engineers and consultants later in the design process. It also supports innovation broadly as it allows teams to model new technologies and systems that are becoming available but have not yet reached mainstream status.
COMFEN focuses on the concept of a "space" or "room" and uses the EnergyPlus and Radiance™ engines and a simple, graphic user interface to allow the user to explore the effects of changing key early-design input variables for the façade, internal loads, lighting controls and HVAC system on energy consumption, peak energy demand, and thermal and visual comfort. COMFEN also provides the ability to import glazing systems that have been developed in Window7, utilizing the International Glazing DataBase (IGDB) for glass choices. Comparative results are rapidly presented in a variety of graphic and tabular formats to help users move toward optimal façade and fenestration design choices.
While the underlying simulation engines were developed over time as part of DOE's national windows and daylighting program, the specific design features of COMFEN were evolved over a several year period by consulting with a series of largely California-based architectural and engineering firms who provided important guidance and feedback on desirable features and then on functionality once the features were implemented.
COMFEN is available at no charge on the LBNL website.
1 aSelkowitz, Stephen, E.1 aHitchcock, Robert, J.1 aMitchell, Robin1 aMcClintock, Maurya1 aSettlemyre, Kevin uhttps://facades.lbl.gov/publications/comfen-early-design-tool-commercial00869nas a2200109 4500008003900000245004400039210004400083260001200127520052400139100002200663856007400685 2013 d00aComplex Fenestration Calculation Module0 aComplex Fenestration Calculation Module c10/20133 aThis document is organized to give you the best possible look into the EnergyPlus calculations. First, the concepts of modeling in EnergyPlus are presented. These include descriptions of the zone heat balance process, air loop/plant loop processes as well as other important processes for the building simulation.
Discussions during the modeling process may reference specific "object names" as found in the Input/Output Reference document.
The remainder of the document focuses on individual models.
1 aKlems, Joseph, H. uhttps://facades.lbl.gov/publications/complex-fenestration-calculation01155nas a2200109 4500008004100000245008700041210006900128260002200197520073300219100002200952856007100974 2012 eng d00aConditioning anisotropic BSDF measurements for lighting and daylighting simulation0 aConditioning anisotropic BSDF measurements for lighting and dayl aBerkeleyc09/20123 aThis report describes the requirements for utilizing bidirectional scattering distribution function (BSDF) measurements produced by the PAB-Opto goniophotometer and similar devices in simulation tools such as Radiance, and describes progress to date in implementing these methods. An interpolation technique has been identified for resampling the measured data, and an initial implementation has been produced. Work continues on improving this technique and software so it may be employed in a streamlined process for reducing BSDF measurements to a usable form and distributed as variable-resolution XML data. This data may then be employed by lighting simulation software to model complex fenestration systems.
1 aWard, Gregory, J. uhttps://facades.lbl.gov/publications/conditioning-anisotropic-bsdf02631nas a2200169 4500008004100000245009900041210007000140260002400210520201600234100002702250700002002277700002302297700002202320700001902342700002102361856007902382 2011 eng d00aCOMFEN 3.0: Evolution of an Early Design Tool for Commercial Façades and Fenestration Systems0 aCOMFEN 30 Evolution of an Early Design Tool for Commercial Façad aPomona, CAc03/20113 aAchieving a net-zero energy building cannot be done solely by improving the efficiency of the engineering systems. It also requires consideration of the essential nature of the building including factors such as architectural form, massing, orientation and enclosure. Making informed decisions about the fundamental character of a building requires assessment of the effects of the complex interaction of these factors on the resulting performance of the building. The complexity of these interactions necessitates the use of modeling and simulation tools to dynamically analyze the effects of the relationships, yet decisions about the building fundamentals are often made in the earliest stages of design, before a 'building' exists to model.
To address these issues, Lawrence Berkeley National Laboratory (LBNL) has developed an early-design energy modeling tool (COMFEN) specifically to help make informed decisions about building façade fundamentals by considering the design of the building envelope, orientation and massing on building performance. COMFEN focuses on the concept of a "space" or "room" and uses the EnergyPlus, and Radiance™ engines and a simple, graphic user interface to allow the user to explore the effects of changing key early-design input variables on energy consumption, peak energy demand, and thermal and visual comfort. Comparative results are rapidly presented in a variety of graphic and tabular formats to help users move toward optimal façade and fenestration design choices.
While COMFEN 1.0 utilized an Excel™–based user interface, COMFEN 3.0 has been reworked to include a simple, more intuitive, yet powerful Graphic User Interface (GUI), a broader range of libraries for associated system and component choices and deliver a wider range of graphic outputs and options.
This paper (and presentation) outlines the objectives in developing and further refining COMFEN, the mechanics of the program, and plans for future development.
1 aSelkowitz, Stephen, E.1 aMitchell, Robin1 aMcClintock, Maurya1 aMcQuillen, Daniel1 aMcNeil, Andrew1 aYazdanian, Mehry uhttps://facades.lbl.gov/publications/comfen-30-evolution-early-design-tool01270nas a2200109 4500008004100000245010400041210006900145260001200214520083900226100002201065856007301087 2011 eng d00aComputing and applying variable-resolution data for bidirectional scattering distribution functions0 aComputing and applying variableresolution data for bidirectional c09/20113 aWe introduce the Tensor Tree representation for bidirectional scattering distribution functions (BSDFs), a variable-resolution data structure designed to minimize storage and computation. We offer a method for reducing full-resolution BSDF data into this format, and relate techniques for the efficient generation of uniformly weighted Monte Carlo samples. The Tensor Tree BSDF representation has been tested and incorporated into the 4.1 release of LBNL's Radiance lighting simulation and rendering system, with additional methods for modeling the appearance of complex fenestration systems. Finally, an independent software library is described for third-party developers who wish to support BSDF data outside of Radiance, and recommendations are made for future development directions.
The commercial building sector is one of the largest energy consumers in the U.S., and lighting, heating, ventilating and air conditioning contribute to more than half of the energy consumption and carbon emissions in buildings. Controls are the most effective way of increasing energy efficiency in building systems; however, the interdependencies among building subsystems must be taken into account to achieve deep energy savings. A networked sensing and actuation infrastructure shared among building systems is the key to optimal integrated control of the interdependent building elements in low energy and zero net energy buildings.
This paper presents a rapid-prototyping controls implementation platform based on the Building Controls Virtual Test Bed (BCVTB) framework that is capable of linking to building sensor and actuator networks for efficient controller design and testing. The platform creates a separation between the controls and the physical systems so that the controller can easily be implemented, tested and tuned with real performance feedback from a physical implementation. We realized an integrated lighting control algorithm using such a rapid-prototyping platform in a testing facility with networked sensors and actuators. This implementation has demonstrated an up to 57% savings in lighting electricity and 28% reduction in cooling demand.
1 aWen, Yao-Jung1 aDiBartolomeo, Dennis, L.1 aRubinstein, Francis, M.1 aRuzzelli, Antonio uhttps://facades.lbl.gov/publications/co-simulation-based-building-controls01390nas a2200145 4500008003900000245011900039210006900158260002200227520083400249100002101083700002201104700002201126700002401148856007201172 2007 d00aCommissioning and verification procedures for the automated roller shade system at The New York Times Headquarters0 aCommissioning and verification procedures for the automated roll aBerkeleyc05/20073 aThis document describes the procedures for verification testing of a newly installed automated roller shade system. The automated roller shade system has been designed to control direct sun and window glare while admitting daylight and permitting view out. Procedures in this document focus on verifying that the glare control aspect of this commercially-available system works prior to building occupancy. A high dynamic range luminance measurement tool, developed for this project, is used to verify that the average window luminance is within acceptable limits. Additional spreadsheet and visualization tools are described. The commissioning agent (CxA) and The New York Times will use these procedures during the commissioning phase of the building to verify that the automated control system is operating as intended.
1 aLee, Eleanor, S.1 aClear, Robert, D.1 aWard, Gregory, J.1 aFernandes, Luis, L. uhttps://facades.lbl.gov/publications/commissioning-and-verification01188nas a2200145 4500008004100000245007500041210006900116490000700185520069000192100002000882700001900902700002100921700002600942856007400968 2004 eng d00aCharge-State-Resolved Ion Energy Distributions of Aluminum Vacuum Arcs0 aChargeStateResolved Ion Energy Distributions of Aluminum Vacuum 0 v973 aThe charge-state-resolved ion energy distributions of metal ions present in a cathodic arc plasma have been measured and analyzed. Contrary to literature data, lower energies were observed for higher charged ions. The observations were explained by opposing acceleration by pressure gradient and electron-ion coupling, and deceleration by part of the discharge voltage. The distributions were well fitted by shifted Maxwellian distributions, giving additional information on plasma parameters. These results are of importance for an improved understanding of the evolution of ion energy distributions, and is hence instrumental for future progress in thin film growth modelling.
1 aRosén, Johanna1 aAnders, André1 aMráz, Stanislav1 aSchneider, Jochen, M. uhttps://facades.lbl.gov/publications/charge-state-resolved-ion-energy01261nas a2200145 4500008004100000245009600041210006900137300001400206490000700220520078700227100001801014700002401032700001901056856004001075 2003 eng d00aCoalescence of Nanometer Silver Islands on Oxides Grown by Filtered Cathodic Arc Deposition0 aCoalescence of Nanometer Silver Islands on Oxides Grown by Filte a1634-16360 v823 aUltrathin silver films have been deposited on glass and oxide-coated glass using filtered cathodic arc deposition and, for comparison, magnetron sputtering. The energetic differences between these deposition methods lead to initially different film properties. Silver films made by cathodic arc deposition show an earlier onset of island coalescence, indicating a lower aspect ratio than islands produced by evaporation and sputtering. However, the as-deposited films are thermodynamically unstable, exhibiting changes on a timescale of minutes. While films of islands tend to increase their sheet resistance with time, the sheet resistance of contiguous films shows a decrease. Both effects can be explained by silver mobility driven to minimize film and interfacial energy.
1 aByon, Eungsun1 aOates, Thomas, W.H.1 aAnders, André uhttp://dx.doi.org/10.1063/1.155895502201nas a2200157 4500008004100000245011300041210006900154260001200223300001200235490000700247520164400254100002201898700002301920700002801943856007201971 2003 eng d00aComparison Between Ray-Tracing Simulations and Bi-Directional Transmission Measurements on Prismatic Glazing0 aComparison Between RayTracing Simulations and BiDirectional Tran c02/2003 a157-1730 v743 aEvaluation of solar heat gain and daylight distribution through complex window and shading systems requires the determination of the bi-directional transmission distribution function (BTDF). Measurement of BTDF can be timeconsuming, and inaccuracies are likely because of physical constraints and experimental adjustments. A general calculation methodology, based on more easily measurable component properties, would be preferable and would allow much more flexibility. In this paper, measurements and calculations are compared for the specific case of prismatic daylight-redirecting panels. Measurements were performed in a photogoniometer equipped with a digital-imaging detection system. A virtual copy of the photogoniometer was then constructed with commercial ray-tracing software. For the first time, an attempt is made to validate detailed bi-directional properties for a complex system by comparing an extensive set of experimental BTDF data with ray-tracing calculations. The results generally agree under a range of input and output angles to a degree adequate for evaluation of glazing systems. An analysis is presented to show that the simultaneously measured diffuse and direct components of light transmitted by the panel are properly represented. Calculations were also performed using a more realistic model of the source and ideal model of the detector. Deviations from the photogoniometer model were small and the results were similar in form. Despite the lack of an absolute measurement standard, the good agreement in results promotes confidence in both the photogoniometer and in the calculation method.
1 aAndersen, Marilyn1 aRubin, Michael, D.1 aScartezzini, Jean-Louis uhttps://facades.lbl.gov/publications/comparison-between-ray-tracing01488nas a2200169 4500008004100000245011300041210006900154260001200223300001400235490000700249520089100256100002401147700001901171700002701190700002301217856007801240 2002 eng d00aCalculation of Thermodynamic, Electronic, and Optical Properties of Monoclinic Mg2NiH40 aCalculation of Thermodynamic Electronic and Optical Properties o c04/2002 a4879-48850 v913 aAb initio total-energy density functional theory is used to investigate the low temperature (LT) monoclinic form of Mg2NiH4. The calculated minimum energy geometry of LT Mg2NiH4 is close to that determined from neutron diffraction data, and the NiH4 complex is close to a regular tetrahedron. The enthalpies of the phase change to high temperature (HT) pseudo-cubic Mg2NiH4 and of hydrogen absorption by Mg2Ni are calculated and compared with experimental values. LT Mg2NiH4 is found to be a semiconductor with an indirect band gap of 1.4 eV. The optical dielectric function of LT Mg2NiH4 differs somewhat from that of the HT phase. A calculated thin film transmittance spectrum is consistent with an experimental spectrum.
1 aMyers, Whittier, R.1 aWang, Lin-Wang1 aRichardson, Thomas, J.1 aRubin, Michael, D. uhttps://facades.lbl.gov/publications/calculation-thermodynamic-electronic02196nas a2200145 4500008004100000050001500041245006500056210006300121520171000184100001901894700002201913700002501935700001701960856007301977 2002 eng d aLBNL-5269900aA Characterization of the Nonresidential Fenestration Market0 aCharacterization of the Nonresidential Fenestration Market3 aThe purpose of this report is to characterize the nonresidential fenestration market in order to better understand market barriers to, and opportunities for, energy-efficient fenestration products. In particular, the goal is to:
The U.S. glass industry is a $27 billion enterprise with both large producers and small firms playing pivotal roles in the industry. While most sectors of the glass industry have restructured and consolidated in the past 20 years, the industry still employs 150,000 workers. Nonresidential glazing accounts for approximately 18% of overall U.S. glass production. In 1999, nonresidential glazing was supplied to approximately 2.2 billion ft2 of new construction and additions. That same year, nonresidential glazing was also supplied to approximately 1.1 billion ft2 of remodeling construction. With an industry this large and complex, it is to be expected that many market participants can influence fenestration selection. If market barriers to the selection of high performance fenestration products are better understood, then the U. S. Department of Energy (USDOE), the Northwest Energy Efficiency Alliance (NEEA), and others can develop programs and policies that promote greater energy efficiency in commercial glazing products.
1 aShehabi, Arman1 aEley, Charles, N.1 aArasteh, Dariush, K.1 aDegens, Phil uhttps://facades.lbl.gov/publications/characterization-nonresidential01286nas a2200133 4500008004100000050001400041245009700055210006900152490001600221520079900237100002201036700002001058856007401078 1995 eng d aLBL-3703800aCalorimetric Measurements of Inward-Flowing Fraction for Complex Glazing and Shading Systems0 aCalorimetric Measurements of InwardFlowing Fraction for Complex 0 v102, Part 13 aThis paper presents a calorimetric measurement of layer-specific inward-flowing fractions of absorbed solar energy for a number of geometric configurations common in fenestrations with shading. The inward-flowing fractions are found to be relatively insensitive to exterior conditions. Results for an interior venetian blind over double glazing agree with thermal model calculations in the literature, and are the first layer-specific verification of these calculations. It is argued that a data base of these inward-flowing fractions for a suitably broad class of geometries will make possible the determination of solar heat gain coefficient from non-calorimetric measurements of solar-optical properties of complex fenestration components, a procedure termed solar-thermal separation.
1 aKlems, Joseph, H.1 aKelley, Guy, O. uhttps://facades.lbl.gov/publications/calorimetric-measurements-inward01428nas a2200121 4500008004100000050001400041245008000055210006900135260002900204520098000233100002101213856007201234 1995 eng d aLBL-3776600aChromogenic Switchable Glazing: Towards the Development of the Smart Window0 aChromogenic Switchable Glazing Towards the Development of the Sm aToronto, Canadac06/19953 aThe science and technology of chromogenic materials for switchable glazings in building applications is discussed. These glazings can be used for dynamic control of solar and visible energy. Currently many researchers and engineers are involved with the development of products in this field. A summary of activities in Japan, Europe, Australia, USA and Canada is made. The activities of the International Energy Agency are included. Both non-electrically activated and electrically activated glazings are discussed. Technologies covered in the first category are photochromics, and thermochromics and thermotropics. A discussion of electrically activated chromogenic glazings includes dispersed liquid crystals, dispersed particles and electrochromics. A selection of device structures and performance characteristics are compared. A discussion of transparent conductors is presented. Technical issues concerning large-area development of smart windows are discussed.
1 aLampert, Carl, M uhttps://facades.lbl.gov/publications/chromogenic-switchable-glazing01580nas a2200157 4500008004100000050001400041245008700055210006900142260002500211490001600236520102900252100002201281700002401303700002001327856007501347 1995 eng d aLBL-3703700aA Comparison Between Calculated and Measured SHGC For Complex Fenestration Systems0 aComparison Between Calculated and Measured SHGC For Complex Fene aAtlanta, GAc02/19960 v102, Part 13 aCalorimetric measurements of the dynamic net heat flow through a complex fenestration system consisting of a buff venetian blind inside clear double glazing are used to derive the direction-dependent beam SHGC of the fenestration. These measurements are compared with calculations according to a proposed general method for deriving complex fenestration system SHGCs from bidirectional layer optical properties and generic calorimetric properties. Previously published optical measurements of the same venetian blind and generic inward-flowing fraction measurements are used in the calculation. The authors find satisfactory agreement between the SHGC measurements and the calculation.
Significant dependence on incident angle was found in the measured SHGCs. Profile angle was not found to be a useful variable in characterizing the system performance. The predicted SHGC was found to be inherently dependent on two angles, although only the incident angle variations were observable under the test conditions.
1 aKlems, Joseph, H.1 aWarner, Jeffrey, L.1 aKelley, Guy, O. uhttps://facades.lbl.gov/publications/comparison-between-calculated-and01932nas a2200169 4500008004100000050001400041245009300055210006900148300001200217490000700229520136600236100001901602700002101621700002301642700002101665856007601686 1994 eng d aLBL-3852500aCharacterization of Sol-Gel Deposited Niobium Pentoxide Films for Electrochromic Devices0 aCharacterization of SolGel Deposited Niobium Pentoxide Films for a433-4430 v363 aNiobium pentoxide films, fabricated by the sol-gel process, were spin coated onto conductive indium tin oxide (ITO)/glass, and microscope slides. These films were cycled in a 1M LiClO4 propylene carbonate (PC) solution, and exhibited electrochromic behavior upon the electrochemical insertion (reduction) and extraction (oxidation) of lithium. In-situ optical transmittance measurements were investigated in the ultraviolet/visible/near-infrared wavelength regions (250-2100 nm). Niobium pentoxide films showed reversible optical switching from 320 to 870 nm, but were found electrochromically inactive in the infrared region. Surface analysis using X-ray photoelectron spectroscopy (XPS) indicated little difference in the chemistry of Nb2O5 films as deposited and lithiated LixNb2O5 films, as XPS binding energies of Nb and O showed no appreciable shifts. These films were found to be amorphous by X-ray diffraction. Optical transmittance measurements combined with cyclic voltamograms and XPS spectra, revealed that the electrochromic behavior of these films occurs due to the insertion of Li+ cations into niobium pentoxide films. The bronze coloration of the niobium pentoxide films could make them useful as an electrochromic counter electrodesfor electrochromic devices.
1 aÖzer, Nilgün1 aBarreto, Timothy1 aBuyuklimanl, Temel1 aLampert, Carl, M uhttps://facades.lbl.gov/publications/characterization-sol-gel-deposited01431nas a2200133 4500008004100000050001500041245010100056210006900157520093400226100001901160700001801179700002101197856007901218 1994 eng d aLBNL-3900500aCharacterization of Tantalum Oxide Films Prepared by Sol-Gel Process for electrochemical devices0 aCharacterization of Tantalum Oxide Films Prepared by SolGel Proc3 aTantalum oxide films were prepared by sol-gel process using tantalum ethoxide Ta(OC2H5)5. The dependence of deposition conditions (i.e. composition of polymeric solutions and spinning rate) on ionic conductivities for tantalum oxide films were studied. The best results achieved for films fabricated by the spin coating technique were from clear polymeric solutions. These films had low packing density ρ=3.2 g/cm3 and good proton conductivity (about 10-6 Ω-1 cm-1). X-ray photoelectron spectroscopy (XPS) was used for studying the compositions of the tantalum oxide films. We report on the use of tantalum oxide films as ion conductors in devices consisting of WO3/Ta2O5/H+ ion storage polymer structure. We found tantalum oxide to have very good properties for proton device applications.
1 aÖzer, Nilgün1 aHe, Yongxiang1 aLampert, Carl, M uhttps://facades.lbl.gov/publications/characterization-tantalum-oxide-films02537nas a2200181 4500008004100000050001400041245010200055210006900157260003100226520187100257100002102128700002702149700002802176700002202204700002502226700002902251856007502280 1994 eng d aLBL-3573200aA Comprehensive Approach to Integrated Envelope and Lighting Systems for New Commercial Buildings0 aComprehensive Approach to Integrated Envelope and Lighting Syste aPacific Grove, CAc09/19943 aWe define a comprehensive approach to integrated envelope and lighting systems design as one that balances energy efficiency with anequal regard to the resultant environmental quality. By integrating envelope components (glazing, shading, and daylighting), lighting components (fixtures and controls) and building HVAC/ energy management control systems, we create building systems that have the potential to achieve significant decreases in electricity consumption and peak demand while satisfying occupant physiological and psychological concerns.
This paper presents results on the development, implementation, and demonstration of two specific integrated envelope and lighting systems:
The energy performance of the systems was estimated using the DOE-2 building energy simulation program. Field tests with reduced scale models were conducted to determine daylighting and thermal performance in real time under actual weather conditions. Demonstrations of these integrated systems are being planned or are in progress in collaboration with utility programs to resolve real-world implementation issues under complex site, building, and cost constraints. Results indicate that integrated systems offer solutions that not only achieve significant peak demand reductions but also realize consistent energy savings with added occupant comfort and satisfaction.
1 aLee, Eleanor, S.1 aSelkowitz, Stephen, E.1 aRubinstein, Francis, M.1 aKlems, Joseph, H.1 aBeltran, Liliana, O.1 aDiBartolomeo, Dennis, L. uhttps://facades.lbl.gov/publications/comprehensive-approach-integrated01843nas a2200181 4500008004100000050001400041245009300055210006900148300000800217520124200225100002101467700002201488700002101510700001801531700001801549700002701567856006701594 1993 eng d aLBL-3314400aCharacteristics of Laminated Electrochromic Devices Using Polyorganodisulfate Electrodes0 aCharacteristics of Laminated Electrochromic Devices Using Polyor a1433 aThe use of polyorganodisulfides as optically passive counterelectrodes in a variety of electrochromic devices are discussed. Characteristic data is presented for electrochmmic devices using proton, and lithium coloration ions with polyethylene oxide electrolyte and polydimercaptothiadiazole positive electrodes. Solid state devices consisting of molybdenum doped W03, amorphous polyethylene oxide electrolyte (a-PEO), and a polyorganodisulfide counter-electrode colored rapidly from a pale yellow to a deep blue-green, upon application of 1.2 V d.c. The photopic transmittance changed from 61 to 98, and the solar transmittance from 45 to 5% during the coloration process. Also, our experiments with polyimidazole are detailed. This family of compounds due to its unique electrical and ion conduction properties allow a single composite ion storage and ion conductor electrode to be made, simplifying the device construction. Devices rnade from this family of compounds color to deep blue-gray upon application of 1.2-1.5 V. Bleaching occurs at -0.4 to -0.5 s. The photopic transmittance changed from 55 to 9%. and the solar transmittance from 34 to 4% during coloration. Both coloration and bleaching are quite rapid.
1 aLampert, Carl, M1 aVisco, Steven, J.1 aDoeff, Marca, M.1 aMa, Yan, Ping1 aHe, Yongxiang1 aGiron, Jean-Christophe uhttps://facades.lbl.gov/publications/characteristics-laminated01308nas a2200193 4500008004100000024001100041245010400052210006900156260003100225490000800256520065800264100002000922700001300942700002300955700002300978700001901001700002301020856007101043 1993 eng d aUC-40000aComparison of AIN Films Grown by RF at Magnetron Sputtering and Ion-Assisted Molecular Beam Epitaxy0 aComparison of AIN Films Grown by RF at Magnetron Sputtering and aSan Francisco, CAc04/19930 v3003 aCrystalline aluminum nitride (AlN) thin films were formed on various substrates by using RF magnetron sputtering of an A1 target in a nitrogen plasma and also by ion-assisted molecular beam epitaxy (IAMBE). Basal-oriented AlN/(111) Si showed a degradation of crystallinity with increased substrate temperature from 550 to 770 °C, while the crystallinity of AlN/(0001) Al2O3 samples improved from 700 to 850 °C. The optical absorption characteristics of the AlN/(0001) Al2O3 films as grown by both deposition methods revealed a decrease in sub-band gap absorption with increased substrate temperature.
1 aChan, James, S.1 aFu, T.C.1 aCheung, Nathan, W.1 aRoss, Jennifer, T.1 aNewman, Nathan1 aRubin, Michael, D. uhttps://facades.lbl.gov/publications/comparison-ain-films-grown-rf