02120nas a2200169 4500008004100000022001400041245009400055210006900149260001200218300001400230490000800244520157100252100001901823700002101842700002301863856006401886 2017 eng d a0360-132300aDaylight performance of a microstructured prismatic window film in deep open plan offices0 aDaylight performance of a microstructured prismatic window film  c02/2017 a280–2970 v1133 a

Daylight redirecting systems with vertical windows have the potential to offset lighting energy use in deep perimeter zones. A microstructured prismatic film designed for such use was characterized using goniophotometric measurements and ray tracing simulations. The synthetically-generated bidirectional scattering distribution function (BSDF) data were shown to have good agreement with limited measured data for normal incident angles (0–60°). Measured data indicated that the prismatic film was most efficient when vertical angles of incidence were between 18 and 35° and within ±45° of normal incidence to the plane of the window so maximum energy savings across the full depth of the zone occurred over the equinox to winter solstice period. Annual lighting energy use and visual comfort in a deep open plan office zone were evaluated using the Radiance three-phase method in several climates and for south and east-facing window orientations. Lighting energy savings were 39–43% for a 12 m (40 ft) deep south-facing perimeter zone compared to the same zone with no lighting controls. The prismatic film with and without a diffuser controlled glare for views parallel to the window but produced glare for seated viewpoints looking toward the window. At mature market costs, the system was projected to have a simple payback of 2–6 years. Technical challenges encountered throughout the evaluation led to improvements in measurement and modeling tools and stressed the importance of having accurate input data for product development.

1 aMcNeil, Andrew1 aLee, Eleanor, S.1 aJonsson, Jacob, C. uhttps://facades.lbl.gov/publications/daylight-performance-000763nas a2200205 4500008003900000245011500039210006900154260003100223653002400254653003300278653002400311653002100335653002500356653001300381100002100394700001900415700002100434700002300455856007900478 2015 d00aDiscomfort glare with complex fenestration systems and the impact on energy use when using daylighting control0 aDiscomfort glare with complex fenestration systems and the impac aBern, Switzerlandc11/201510abuilding simulation10aComplex fenestration systems10adaylighting control10aDiscomfort Glare10aEnergy Use Intensity10aradiance1 aHoffmann, Sabine1 aMcNeil, Andrew1 aLee, Eleanor, S.1 aKalyanam, Raghuram uhttps://facades.lbl.gov/publications/discomfort-glare-complex-fenestration01223nas a2200133 4500008004100000245009400041210006900135260001200204520073200216100001900948700002100967700002300988856007801011 2013 eng d00aDaylight performance of a microstructured prismatic window film in deep open plan offices0 aDaylight performance of a microstructured prismatic window film  c09/20133 a

Daylight redirecting systems with vertical windows have the potential to offset lighting energy use in deep perimeter zones. A microstructured prismatic film was designed and fabricated by a manufacturer to redirect sunlight to the ceiling plane when the film was installed in the upper portion of a window. Energy simulations based on the raytracing program, Radiance, were performed to evaluate the annual lighting energy use and discomfort glare in a deep open plan office zone in several climates and for south and east-facing window orientations. These simulations showed that when the prismatic film was combined with a light diffusing film, the system was able to deliver significant energy savings without glare.

1 aMcNeil, Andrew1 aLee, Eleanor, S.1 aJonsson, Jacob, C. uhttps://facades.lbl.gov/publications/daylight-performance-microstructured01397nas a2200145 4500008004100000245013200041210006900173260001200242300000700254520084000261100003101101700001901132700002101151856007901172 2012 eng d00aDevelopment of a simulation-based controls framework for implementation of controls algorithms for complex fenestration systems0 aDevelopment of a simulationbased controls framework for implemen c09/2012 a153 a

Effectively controlled dynamic windows can substantially reduce the energy consumption of buildings. Unfortunately, modular and extensible frameworks for testing and evaluating window system control algorithms that include the effects of thermal mass are missing in the research community.

This paper describes a modular and extensible simulation-based framework that uses different simulation tools such as EnergyPlus, Modelica, Radiance, and the Building Controls Virtual Test Bed (BCVTB) to develop and evaluate the performance of integrated façade control strategies. We present a simulation framework and a proof-of concept application using the framework to control a venetian blind in a physical test cell in order to reduce its zone thermal load based on solar inputs and internal gains measured at the test cell.

1 aNouidui, Thierry, Stephane1 aMcNeil, Andrew1 aLee, Eleanor, S. uhttps://facades.lbl.gov/publications/development-simulation-based-controls